When using WPS Print, common questions usually involve printer connection, print quality, and setting differences; this section includes 3 common questions and a glossary.
FAQ
What should I do if I cannot find an available printer?
- Make sure your phone and printer are in a network environment where they can communicate normally.
- Check that the printer is turned on and supports a print service that works with the current mobile device.
- Reopen the print screen to view printers connected to the current device, and add a printer if needed.
- If you still cannot connect to a printer, use Export as Print File or System Print Service first.
What should I do if the print quality is not ideal?
- Open Print Settings in the print preview screen.
- Find the Media and Quality related options.
- Adjust the print quality or related media settings as needed.
- Preview again and resend the print job.
Why do the available settings change after I switch printers?
- Different printers support different print capabilities.
- After you select another printer, the print settings page updates based on what that printer supports.
- If you do not see options such as single-sided, duplex, grayscale, or color, the current printer usually does not support changing that setting.
- If you need a specific setting, switch to a printer that supports it and try again.
Glossary
| Term | Definition |
|---|---|
| Print Preview | The screen that shows the output effect before printing, so you can confirm layout and settings. |
| Print Range | The page scope for the current print job, such as all pages, the current page, or a custom page range. |
| System Print Service | The printing capability provided by iOS, which can be used to complete output through the system-level print flow. |