How to Use WPS Configuration Check on Windows

Use Configuration Check with 2 how-to topics, both available without membership; you can open the review panel and review or fix workflow issues.

How-to Index

How-to Guide

1. Open Configuration Check

Entry path: Automation editor → Configuration Check button on the left

1. Open the automation flow that you want to edit and enter the automation editor.
2. Check the left toolbar for the Configuration Check button.
3. If the current flow has configuration issues, a red badge with a number appears on the button.
4. Click Configuration Check.
5. Review the issue list in the panel on the right.

Success Criteria

• Interface result: the Configuration Check panel appears on the right.
• What you can do next: you can review the issue count, read issue descriptions, and select a specific issue.

Tips While Using

• Common mistake: if you are not in the automation editor, you will not see this entry.
• Environment note: the current flow must be open and editable.

2. Review and Fix Issues

Entry path: Configuration Check panel → Issue list

1. In the Configuration Check panel, review the issue count and descriptions.
2. Find the issue that you want to handle.
3. Click the issue to jump to the related workflow step.
4. Complete the required field or correct the related setting as prompted.
5. Review the Configuration Check status again after the fix.
6. When the red badge disappears or the panel no longer shows required fixes, the flow can be turned on normally.

Success Criteria

• Interface result: the selected issue jumps to the related step, and the issue count decreases or disappears after the fix.
• What you can do next: the flow can continue to the save and pre-enable review stage.

Tips While Using

• Common mistake: reading the issue description without using the jump action can make troubleshooting slower.
• Environment note: if required issues remain, the flow cannot be turned on.