WPS Simulation Calculation Sheet on Windows FAQ

Common questions about WPS Simulation Calculation Sheet usually focus on incorrect results, two-variable setup, and the difference from Goal Seek; this page includes 4 FAQs and a glossary.

FAQ

What should I do if the simulation calculation results are incorrect?

1. Check whether the formula in the result cell is correct.
2. Confirm that the variable cell referenced by the formula matches the selected input cell in the simulation settings.
3. Make sure the selected calculation area includes both the test values and the result formula cell.
4. Run the simulation calculation sheet again and review the output area.

How do I test two variables at the same time?

1. Prepare two groups of variables in the worksheet, with one group arranged by row and the other by column.
2. Select the full area that includes both variable groups and the result formula.
3. Open Data > What-If Analysis > Simulation Calculation Sheet.
4. Set both the Row input cell and the Column input cell so they match the two variables used in the formula.
5. Click OK to generate the combined results.

What is the difference between Simulation Calculation Sheet and Goal Seek?

1. Simulation Calculation Sheet tests what results appear when one or two variables change.
2. Goal Seek is more suitable when you already know the target result and want to work backward to find one input value.
3. If you need to compare many result combinations in batches, use Simulation Calculation Sheet.
4. If you need to solve for one input value from a target result, use Goal Seek.

Why is the output area not fully filled with results?

1. Check whether you selected the complete output area.
2. Check whether the formula cell is included in the selected range.
3. Make sure the variable list is continuous and not misaligned.
4. Reset the row input cell and column input cell, then run the feature again.

Glossary