How to Use the NUMBERSTRING Function in WPS on Windows

Last updated:July 20, 2026

This how-to guide includes 3 task topics, all available without membership; use the index below to enter the function, complete the calculation, and verify the result.

How-to Index

No.TopicMembership Requirement
11. Enter the NUMBERSTRING functionFree
22. Fill in parameters and complete the calculationFree
33. Check the result and recalculate manuallyFree

How-to Guide

1. Enter the NUMBERSTRING function

Entry point: Formula tab → formula bar

  1. Open your spreadsheet and select the cell where you want the result to appear.
  2. Type = in the formula bar or directly in the cell.
  3. Continue by typing NUMBERSTRING(.
  4. Review the syntax guidance that appears and confirm the function name and parameter structure.

Success Criteria

  • On-screen result: The function name appears in the cell or formula bar.
  • Next step available: You can continue entering parameters immediately.

Tips While Using

  • Common mistake: If you do not start with =, the content may be treated as plain text.
  • Environment note: The target cell must be editable.

2. Fill in parameters and complete the calculation

Entry point: The target cell where the function has already been entered

  1. After NUMBERSTRING(, enter the required parameters based on the syntax guidance.
  2. Check that parentheses, separators, and parameter order are complete.
  3. Press Enter to confirm the formula.
  4. Check whether the calculated result appears in the current cell.

Success Criteria

  • On-screen result: The cell shows the calculated result instead of unfinished formula text.
  • Next step available: You can copy the formula, revise parameters, or reference other cells.

Tips While Using

  • Common mistake: Unmatched parentheses, incomplete parameters, or incorrect separators can cause an error.
  • Environment note: Parameter values must match the function requirements.

3. Check the result and recalculate manually

Entry point: The result cell and related referenced cells

  1. Review whether the displayed result matches your expectation.
  2. If the formula references other cells, confirm that the referenced data format is correct.
  3. If the result does not update in time, press F9 to recalculate manually.
  4. Check again to confirm that the result has updated.

Success Criteria

  • On-screen result: The result stays consistent with the current data.
  • Next step available: You can save, copy, or use the result in later calculations.

Tips While Using

  • Common mistake: Numbers stored as text or circular references can affect result checking.
  • Environment note: On some keyboards, you may need to use a system function key combination for recalculation.