How to Use WPS Strikethrough on macOS

Use WPS Strikethrough through 5 how-to topics, all available without membership; the index below helps you jump to each method quickly.

How-to Index

How-to Guide

1. Apply strikethrough from the ribbon

Entry point: Select the target text, then open the Home tab and click Strikethrough

1. Select the text you want to mark.
2. Click the Home tab at the top of the window.
3. Click the Strikethrough button.

Success Criteria

• Interface result: The selected text shows a single strikethrough line.
• What you can do next: You can keep typing, save the file, or combine it with other text styles.

Tips While Using

• Common mistake: If no text is selected first, the button will not apply the format to the intended content.

2. Apply strikethrough from the floating toolbar

Entry point: Select text, then click Strikethrough on the floating toolbar

1. Select the text you want to mark.
2. Wait for the floating toolbar to appear.
3. Click the Strikethrough button on the floating toolbar.

Success Criteria

• Interface result: The selected text displays strikethrough.
• What you can do next: You can continue adjusting other text styles from the floating toolbar.

Tips While Using

• Common mistake: If the selection is cleared too quickly, the floating toolbar may not remain visible.

3. Apply strikethrough from the right-click menu

Entry point: Select text, right-click, open Font, and select Strikethrough

1. Select the text you want to mark.
2. Right-click the selected text and choose Font.
3. In the Font dialog box, select Strikethrough.
4. Click OK to save the setting.

Success Criteria

• Interface result: The selected text shows strikethrough.
• What you can do next: You can continue adjusting other font settings in the same dialog box.

Tips While Using

• Common mistake: If you close the Font dialog box without confirming, the setting will not take effect.

4. Apply double strikethrough from the right-click menu

Entry point: Select text, right-click, open Font, and select Double strikethrough

1. Select the text you want to mark with double strikethrough.
2. Right-click the selected text and choose Font.
3. In the Font dialog box, select Double strikethrough.
4. Click OK to save the setting.

Success Criteria

• Interface result: The selected text shows a double strikethrough effect.
• What you can do next: You can continue editing the text or save the document.

Tips While Using

• Common mistake: Strikethrough and double strikethrough are different styles, so confirm which one your document requires before applying it.

5. Remove strikethrough

Entry point: Select text that already has strikethrough, then use the same entry point again to remove the format

1. Select the text that already has strikethrough applied.
2. Open the same setting from the Home tab, floating toolbar, or Font dialog box.
3. Click Strikethrough again, or clear the Strikethrough or Double strikethrough option.
4. Confirm the setting and return to the document.

Success Criteria

• Interface result: The strikethrough or double strikethrough line disappears from the text.
• What you can do next: The text returns to normal display and can be edited further.

Tips While Using

• Common mistake: If double strikethrough is applied, confirm that you are clearing the style that is currently active.